Cargo Operations Sea Year Practice Exam

These questions are part of the practice quiz. Start practicing

• The party responsible for loading and lashing cargo on RoRo/Container is the ______, while the crew is responsible for ______ during sea passage.
• Which item is commonly reviewed during port arrival cargo readiness checks?
• What action is essential if a container shows damage or leakage before loading?
• What is the purpose of pushing and pulling load restraint and when is it used?
• Why are segregation requirements essential when planning cargo stowage?
• After stowage, reefer containers require electrician inspection.
• What is the role of corner posts in securing a coil on deck?
• What should crew prepare for a Port State Control inspection in relation to cargo operations?
• Maintaining ballast water exchange logs primarily serves which purpose?
• What is the purpose of using taglines in crane operations?
• Which components are used to secure containers on containerships?
• Prior to the start of ventilation on a RORO, what must be done?
• Which packing group indicates the highest danger?
• How does trimming affect cargo loading, and what actions can be taken to manage trim?
• Why should weighbridge data be verified before finalizing the load plan?
• What documentation is typically required when non-conformant cargo is discovered?
• Lashing rods are secured from ______ to ______.
• How is the correct segregation of oxidizers and fuels achieved in containerized cargo?
• Which actuation type is used for watertight doors?
• Dangerous cargo is stored on deck because of which three factors?
• 40 ft containers (FEU) bay numbers are even on which side?
• Hazardous Cargo Class 2 corresponds to which category?
• Container operators use ______ that can expand to 40-60 ft.
• Reefer containers require three specific provisions:
• Loading and lashing of cargo on RORO/Container is the job of the ________, the crew is responsible for ________ at sea.
• Hazardous Cargo Class 8 is associated with which type of dangerous cargo?
• What is the proper interpretation of pre-weighed cargo versus loaded cargo in terms of stability?
• What elements must be included in a dangerous goods declaration before loading?
• Hazardous cargo packing group 2 indicates what level of danger?
• On a RORO what is the first thing that is done after docking and lowering the ramp?
• Which statement accurately describes a hatch sealing survey?
• Which statement describes twist locks?
• How should dangerous goods be labeled and placarded on packages and containers in compliance with IMDG?
• Tomming is the process of securing cargo from which point to the cargo?
• Which statement best describes the order of danger levels for the three packing groups?
• Which factors are checked to ensure bulk cargo stability under IMSBC code before loading?
• Container bays are organized in which direction?
• What steps should be taken to ensure proper documentation and traceability of all cargo on a voyage?
• Containers are stowed by bays, rows and tiers. Which set completes this statement?
• A letter of protest can be written due to ______.
• What is the responsibility of the cargo officer in charge during loading and voyage?
• In a container stowage number, what do the last two digits represent?
• Hazardous cargo packing group 1 indicates what level of danger?
• Never lash cargo over the top because it increases ________, use _______
• Container stowage is a ___ digit number.
• Hazardous Cargo Class 5 corresponds to which material type?
• Hazardous material must be inspected _______,______,and________.
• What defines point load?
• What are the lashings used on ROROs?
• How can a ship's storm stance be identified and what effect does it have on cargo operations?
• Which component primarily secures containers to the deck?
• Which feature on ROROs serves as the primary lashing securing point?
• How is a classification society requirement in cargo handling best described?
• Class 3 liquids volatile flashpoint is _____ or below.
• Which item is typically included in port arrival cargo readiness checklists?
• What is the immediate action when misdeclared cargo is discovered during loading?
• What action should be taken if hold shows signs of water ingress during cargo operations?
• The first two digits of a container stowage number indicate what?
• In USCG repairs, indents covering what depth must be repaired?
• How should you plan for a multi-port voyage in terms of cargo operations and stowage flexibility?
• When loading hazardous cargo in a mixed fleet, which practice best reduces risk?
• What is the role of stability calculations in cargo operations, and when should they be performed?
• Why is monitoring weather and sea state important during crane operations?
• When loading hazardous cargo in a mixed fleet, how should crews ensure compatibility with non-hazardous cargo aboard?
• Container tiers are organized in which direction?
• Which statement describes FEU TEU securing?
• What are the bottoms of boxes and containers made of
• For 20 ft containers (FEU), bay numbers are assigned as what?
• Containerships use _____ and _____
• In a stowage plan, what is the purpose of the lashing plan component?
• Hazardous Cargo Class 2 is associated with which type of dangerous cargo?
• Container rows are organized in which direction?
• When lashing the ____ lash must be equal to the ____ lash to create a counteracting force
• Give an example of a segregation rule for incompatible cargo and explain its purpose.
• Lashing rods are ______ inboard.
• Saltwater ingress survey focuses on preventing saltwater ingress and is typical for which ships and components?
• In a container stowage number, which digits indicate the tier number?
• What is the recommended process for Ship-to-Ship (STS) cargo transfers in terms of securing and documentation?
• ABS maximum wastage for steel permitted is ______
• What is the purpose of the Port State Control inspection in relation to cargo operations, and how can crew prepare?
• Hazardous Cargo Class 9 is associated with which type of dangerous cargo?
• What is the purpose of a dry run or weight check when calculating the load plan?
• Which statement best describes MARPOL compliance during ballast discharges and hold cleaning?
• On deck, tiers start at what number and in which direction do they progress?
• Explain the importance of genuine chocking and gunnage for securing heavy loads.
• For 40 ft containers (FEU), the bay number is assigned as what?
• FEU are secured with ______ combinations, TEU are secured with ____ combination.
• A cargo manifest is a document listing cargo items, weights, and destinations. Why must it align with the stowage plan and load plan?
• Under IMDG regulation, when are placards required on containers?
• Types of corrosion are ______,______ and ________.
• At what angle should cargo be lashed at?
• Shoring is the process of securing cargo from which point to which point?
• A hold has been partially loaded with dry bulk and previously loaded wet bulk. What issue might occur and how should it be addressed?
• What is the role of twist locks and under-deck cell guides in container operations?
• What is the primary purpose of a stowage plan for a general cargo operation?
• What is the purpose of half loops?
• Which item is not part of the described lashing system?
• What must every container have to secure it?
• Torsional stress is described as?
• What procedure ensures compliance with IMSBC Code for bulk cargo loading?
• Which characteristic indicates a compromised securing point?
• How would you respond to a suspected cargo contamination or leakage during discharge?
• Which component is used to position containers within the hold and keep them aligned?
• What are the standard dimensions of a container in terms of width and height?
• Hazardous Cargo Class 3 is associated with which type of dangerous cargo?
• What voltage is required at deck sockets for reefer containers?
• How does the IMDG Code affect the handling and stowage of dangerous goods onboard a cargo ship?
• Which feature on ROROs serves as a lashing securing point?
• What component must every container have to secure it during stowage?
• During a voyage, if cargo changes, which documents must be updated?
• When a cargo claim is suspected, which entities should be notified?
• Hazardous cargo packing group 3 is ____ danger.
• Which practice helps prevent lateral movement of containers in a stacked container operation?
• Why are lashing rods positioned three high outboard but two high inboard?
• Which survey focuses on preventing saltwater ingress?
• Why are segregation charts used for oxidizers and fuels in containerized cargo?
• What is the purpose of the dry cargo stowage factor and how is it used?
• Container tiers are organized in which direction?
• In a container stowage number, what do the second two digits represent?
• Which statement best describes the securing requirements for breakbulk versus containerized cargo on board?
• Which statement about lashings for heavier vehicles is true?
• What are the advantages to containerization
• Which statement best describes the difference between fiber rope and steel wire rope for cargo rigging?
• Hatch sealing survey is associated with what practice?
• What is the purpose of lashings in deck cargo operations?
• Lashing rods are ______ outboard of the vessel.
• Which option describes a characteristic not found in a good securing point?
• Container rows are organized in which direction?
• How should a vessel manage ballast water exchange during a cargo operation to minimize environmental impact?
• A FEU container is 40 feet long.
• What makes a watertight door watertight?
• What are the six types of surveys?
• Gas tight doors have ______ and ______.
• Onhire/offhire survey documents the condition of what?
• What is the free surface effect and how can it be mitigated during loading?
• 20 ft containers (FEU) bay numbers are odd on which side?
• Class 3 liquids nonvolatile flashpoint is ______ or greater.
• Which statement about lashing arrangements is correct?
• Bridge clips are used for what on ROROs?
• In watertight door hardware, which term refers to the feature that helps seal at the door edge?
• What is the first defense against corrosion?
• How do you assess the risk of cargo shift during heavy seas and what actions can mitigate it?
• Container bays are organized along the length of the vessel in which direction?
• A bad securing point will be ____ and ____
• What checks should be performed on hatch covers and hatch lining prior to bulk cargo loading?
• Why is it important to observe container stacking limits and weight distribution when loading a mixed container voyage?
• Hazardous Cargo Class 7 deals with what type of hazard?
• Twist locks primarily secure containers to which relation?
• When containerizing cargo, what considerations govern stacking and securing to prevent stack collapse in rough seas?
• Watertight doors are ______.
• What are the dimensions of a 40 ft container or FEU
• Which statement about Class 3 flashpoints is true?
• Which action is the first step in addressing a potential cargo survey claim due to damaged or missing cargo at discharge?
• What is the procedure if you discover a non-conformant cargo during loading (e.g., missing paperwork or misdeclared goods)?
• Racking stress occurs where?
• Which item is typically checked during a cargo survey to verify alignment with the plan and manifest?
• In the context of reefer containers, what considerations ensure proper temperature control during voyage?
• Inserts must be _______ because ________ manifest stress.
• Which action is essential for a safe crane lifting operation during cargo loading?
• Hazardous Cargo Class 1 is associated with which type of dangerous cargo?
• Containers below deck are stored in _________.
• Besides estimating space, what is another key purpose of a dry cargo stowage plan?
• In a container stowage number, which digits indicate the bay number?
• What are the typical responsibilities of a ship's deputy or bosun during cargo operations on deck?
• Racking stress is defined as the intersection of which structural features?
• Which of the following is NOT an advantage of containerization?
• What are essential elements of an IMDG shipper's declaration and how is it used onboard?
• Hazardous Cargo Class 5 is associated with which type of dangerous cargo?
• What are the two primary damage mechanisms listed?
• Hazardous Cargo Class 7 is associated with which type of dangerous cargo?
• Hazardous Cargo Class 6 is associated with which type of dangerous cargo?
• When determining lashings for a heavy deck cargo item, which factors are considered?
• In USCG repairs, inserts must cover at least what area?
• Explain how to handle cargo residue from last voyage when loading new cargo.
• Blocking and Bracing differ in what they prevent.
• Lashing rods secure from only which relation?
• Which combination of securing measures is recommended to minimize movement and protect a coil secured on deck?
• Which survey type documents the overall condition of the ship, including hull and engines?
• Torsional stress occurs due to what relative movement?
• Lashing rods secure containers from which relation?
• Hazardous Cargo Class 4 is associated with which type of dangerous cargo?
• Which of the following lists the three types of securing points used on containers?
• What is a hatch coaming, and why must its soundness be checked?
• What are the dimensions of a 20 ft container or TEU
• Which action supports MARPOL ballast water compliance?
• How does the difference between breakbulk and containerized cargo influence securing methods on board?
• Below deck, the lowest tier starts at what number and in which direction does it progress?
• What does twisting the lock on a container achieve in securing on deck?
• Which Hazardous Cargo Class includes corrosive materials?
• During a cargo survey, which item is checked to confirm alignment with the cargo plan and manifest?